Demonstration Videos
See it to believe it - a Vaughan Chopper Pump in action speaks for itself. Follow the link below, sit back, and enjoy!
HE
Horizontal End Suction
- Available for flows up to 600 L/s and heads up to 80 metres
- Back pull-out design with externally adjustable cutting clearances
- Heavy-duty bearing housing with B10 bearing life 100,000 hours
- Range of sealing systems available including Vaughan “flushless” or tandem seal configuration
PE
Vertical Dry Pedestal
- Dry well solution for installations with limited floor space
- Available for flows up to 600 L/s and heads up to 80 metres
- Back pull-out design with externally adjustable cutting clearances
- Range of sealing systems available including Vaughan “flushless” or tandem seal configuration
SP
Self-Primer
- Self-priming capability up to 7.6 metres dry suction lift
- Sizes 4″, 6″, 8″ and 10″ discharge available for flows up to 360 L/s
- Back pull-out rotating assembly with heavy-duty Vaughan cartridge seal
- Available as direct-drive or in a range of belt-driven configurations
V
Vertical Wet Well
- Vaughan’s most popular sump pump, available for flows up to 600 L/s and heads up to 80 metres
- Column lengths available from 600mm to 6+ metres long
- Heavy-duty oil-filled bearing housing for extended bearing life
- Capable of running dry or at extremely low liquid levels
C
Cantilever
- Robust design – ideal for severe abrasive or corrosive service
- Available up to 1.2 metres in length depending on speed
- No submerged seals or bearings for reduced contamination
- Electric motor and wiring is kept out of pumped media
VR
Vertical Recirculator
- 3″ – 8″ units available for sumps up to 6+ metres deep
- Integrated nozzle off pump discharge for effective sump mixing
- 3-way valve enables easy switch between recirc/pump-out operation
- Lever controls at surface level for easy operator adjustment
S/SE
Electric Submersible
- Ideal for deep pump stations with heavy solids loadings
- Available for flows up to 600 L/s and heads up to 80 metres
- Tandem mechanical seals for maximum motor protection
- Available as a portable unit or for guide rail operation, including retrofit
HY
Hydraulic Submersible
- Portable and light-weight submersible ideal for mobile/contractor operation
- Commonly used for sludge tank and digester cleanout service
- Available as pump only or complete with portable ring stand
- Can be supplied complete with hydraulic drive or as bare shaft unit
SR
Submersible Recirculator
- 3″ – 6″ units available for flow rates up to 170 L/s
- Integrated nozzle off pump discharge for effective sump mixing
- 3-way valve enables easy switch between recirc/pump-out operation
- Lever controls at surface level for easy operator adjustment